In order to prevent accident, preheating starter cannot be used in conjunction with cold start liquid.

Every short distance or insufficient battery charging machine, should be based on the use of preheating starter battery capacity.

Under normal working condition of the preheating starter, his car, diesel engine start many times can't check the start-up speed and fuel oil supply situation.

In the extremely low temperatures using preheating starter, usually don't need you will tread the accelerator pedal to the end, to prevent oil system after start-up speed rise rapidly cause oil supply can't keep up with the stall.

The hydraulic oil foaming is due to the oil mixed with air or hydraulic oil quality is bad. Damage to the fuel tank oil level is low, the tubing and accessories, loose connection, hydraulic pump and hydraulic cylinder, hydraulic oil performance does not meet the requirements of leak can lead to bubbles in the hydraulic system.

Method: if the oil level is too low, should include the specification, the same type of hydraulic oil; Regularly check sample, if the deterioration of oil product should oil change as soon as possible, when the oil change to put net residual oil tank and flush the hydraulic system; Hydraulic pump work to see if there are large noise, may be hydraulic pump leakage and in air, the need to pump for maintenance and repair; If hydraulic cylinders, tubing, fittings and the pipe joint leakage, should be timely replacement or repair.

Preheating starter is not heated

Not bad open preheating switch, wiring, relay not suck, circuit protection fuse fusing, controller does not work (bright red), damage of preheating starter and battery power shortage will cause the starter is not heated heating. For the cause of the problem above, can check the corresponding parts, respectively, to replace or repair damaged parts.